Vehicle modification is within the right of every owner. If people wish to make changes to their own car, then they can do so to their liking. However, the right must be balanced with the public’s safety. This becomes a public concern once the modified vehicles are used on the road. There are lots of other cars and pedestrians out there.

If the changes made the car difficult to control, then we have a problem. Laws have been passed to regulate this practice in the hopes of reducing accidents due to unsafe upgrades. Owners are required to obtain mod plates in Brisbane to certify that all of the changes done comply with the standards.

What needs to be certified?

Simple mods need not be taken to an inspector for approval. It is perfectly fine to make minor changes that do not affect the way the vehicle performs or how the passengers are secured. It is only when these things are dragged into the equation that certifications are required. Complex mods that significantly impact the engine, for instance, will affect the way that the car handles on the road. It has to be shown that no laws were violated in the procedure and that the vehicle can still be safely driven despite the upgrade. It all boils down to roadworthiness.

Complex Modification Examples

You will need to pass inspection if the changes are similar to the following: engine upgrades, engine replacements, brake system substitution, gearbox modifications, and the like. Any single one of these can drastically affect how the vehicle performs under certain conditions. The brakes are particularly sensitive and cannot be compromised. It must be checked whether the proper procedures were followed when making the change. It will be tested to see performance under stress. Body modifications are also under the law for the same reason. The rule of thumb is to consider other motorists and not go too much beyond the manufacturer’s settings.

Going to an Accredited Inspector

Once the changes have been completed, then contact an accredited inspector immediately. The shops are tasked with complete vehicle checkup to find all of the mods. Each will be tested according to the standard procedures in order to see whether they compromise the safety of the car or not. These are run by experienced mechanics who were able to pass all of the requirements for this type of job. Look for their license to make sure that you are getting a duly recognized certification. There are codes for every mod that will be indicated on the plate.